Product ID:990T003 MIL P 23377D COMPONENT B
MSDS Date:06/18/1986
FSC:8010
NIIN:00-082-2450
Kit Part:Y
MSDS Number: BCXYZ

ENTERPRISE CHEMICAL COATINGS CO-DIV INSILCO CORP

2841 S ASHLAND AVE
CHICAGO, IL 60608-5322
US

Emergency Phone: 312-541-9000

Info Phone: 312-541-9000

Cage: 60035

ENTERPRISE CHEMICAL COATING CO DIV OF INSILCO CORP

CHICAGO, IL 60608-5322 US

Cage: 60035

TOLUENE (IARC CARC- GROUP 3) *97-2*

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 15%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ISOBUTANOL, 2-METHYL-1-PROPANOL, ISOBUTYL ALCOHOL

CAS: 78-83-1

RTECS: NP9625000

Fraction By Weight: 65%

OSHA PEL 300 MG/CUM

ACGIH TLV: 152 MG/CUM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: PROLONGED/REPEATED CONTACT MAY
CAUSE INJURY, SENSITIZATION/OTHER ALLERGIC RESPONSES.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:HEADACHE, NAUSEA

First Aid:INHALATION: REMOVE FROM EXPOSURE. RESTORE BREATHING. EYES:
FLUSH IMMEDIATELY W/WATER. SKIN: WASH W/SOAP & WATER. OBTAIN
MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:TCC
Flash Point:40F
Lower Limits:1.3
Upper Limits:12
Extinguishing Media:ANY CLASS B FIRE EXTINGUISHER
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIPMENT W/SELF CONTAINED
BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT, ELECTRICAL EQUIPMENT,
SPARKS & OPEN FLAME.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID VAPORS.
VENTILATE AREA. CONTAIN & REMOVE W/INERT ABSORBENT & NONSPARKING
TOOLS. SCRUB AREA W/5% ACETIC ACID/DETERGENT.

Handling and Storage Precautions:KEEP AWAY FROM HEAT/SPARKS/OPEN FLAME.
STORE IN TIGHTLY CLOSED CONTAINERS. WHEN TRANSPORTING, DON'T EXCEED
120F.
Other Precautions:USE RESPIRATOR DUDRING SPRAYING.

Respiratory Protection:VAPOR TYPE OSHA APPROVED RESPIRATOR.
Ventilation:LOCAL EXHAUST: IF HEATED/SPRAYED. MECHANICAL (GENERAL):
GOOD GENERAL VENTILATION
Protective Gloves:CHEMICAL RESISTANT POLYETHYLENE/RUBBER
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Other Protective Equipment:SAFETY SHOWER, EYE BATH, CLEAN LONG LEG,
LONG-SLEEVE WORK CLOTHING.
Work Hygienic Practices:WASH AFTER HANDLING & BEFORE EATING/SMOKING.
Supplemental Safety and Health

HCC:F3
Boiling Pt:B.P. Text:180F
Vapor Pres:70
Vapor Density:2.5
Spec Gravity:0.827
Evaporation Rate & Reference:(BUTYL ACETATE=1): 5.7
Solubility in Water:<0.1%
Appearance and Odor:TRANSPARENT, STRAW COLORED LIQUID W/MODERATE AMINE
ODOR
Percent Volatiles by Volume:84

Stability Indicator/Materials to Avoid:YES
EPOXY RESINS
Stability Condition to Avoid:HEAT, ELECTRICAL EQUIPMENT, SPARKS, OPEN
FLAME.
Hazardous Decomposition Products:BY BURNING: CO
Conditions to Avoid Polymerization:EPOXY RESINS UNDER UNCONTROLLED
CONDITIONS.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.